Tel

+86 18317721166

Phone

+86-372-8192266 +86 18837238975
Navigation

Ethylene oxide sterilizer

Current Position:HOME > SOLUTIONS > Ethylene oxide sterilizer >

HTAJ-3cube series Ethylene oxide sterilizer

Date:2020-08-11 17:03

Description:

The range of large-scale HTAJ-3 ethylene oxide sterilizer is a kind of low-temperature sterilization equipment: This product is designed by using advanced computer technology, automation technology, welding technology and process on the bas...

Detailed introduction
Description of Ethylene oxide sterilizer

AKA: Ethylene oxide sterilization machine | EtO sterilization equipment | Hospital sterilization machine | Facemask disfection machine | Large scale EO gas Sterilizer
Type: Medical surgical sterilization equipment
Sterilization capacity: 2-20 cbm one time
Sterilant: Ethylene oxide sterilization gas
Features: High efficiency, intelligent system, high safety
Application: Dispossable medical mask, surgical masks, protective clothing, medical equipment and so on
Main size: 2 cbm EO sterilizer, 3 cbm EtO chamber, 
 

 

HTAJ-3cube series Ethylene oxide sterilizer

 

The range of large-scale HTAJ-3cube ethylene oxide sterilizer is a kind of low-temperature sterilization equipment: This product is designed by using advanced computer technology, automation technology, welding technology and process on the basis of absorbing the advantages of similar products at home and abroad.
Precautions of Ethylene oxide sterilizer installation

 

(1) Installation requirements of Ethylene oxide sterilizer: The ethylene oxide sterilizer must be placed in a well-ventilated place, and it must not be placed near a fire source. In order to facilitate repair and regular maintenance, 51cm space should be reserved on each side (including the top) of the ethylene oxide sterilizer. Special exhaust pipes should be installed and completely isolated from other exhaust pipes of the building.

(2) Ethylene oxide safety protection principles and precautions:

1) Keep ethylene oxide sterilizers and cylinders or cans away from sources of ignition and static electricity.

2) Ethylene oxide storage should be free of ignition sources, no rotating motor, no sun, good ventilation, and the temperature is lower than 40 ℃, but it should not be placed in the refrigerator. Dispose of in strict accordance with the relevant national storage requirements for flammable and explosive materials.

3) Do not use too much force when administering or opening the bottle, so as not to spray the liquid.

4) Monitor the air concentration of the ethylene oxide working environment every year.

5) Ethylene oxide staff should be trained in expertise and emergency management.

 

HTAJ-3cube series Ethylene oxide sterilizer

HTAJ-3cube series Ethylene oxide sterilizer

 

Parameter of Ethylene oxide sterilizer installation
 
Product forms HTAJ-3cube manual door cabinet
Power source AC380V,50Hz
Sterilizer size (Length × width × height): 2500×1900×1800mm
Sterilizer volume 3.2 m³
Sterilizer interior material 304 Anticorrosive stainless steel
Outer carton material Carbon steel
Temperature during sterilization 50℃ ±3℃
Working pressure -60kpa
Maximum anti-stress value -150kpa
Humidity during sterilization 45%-75%  
Pressure sensor The built-in pressure sensor automatically detects the pressure inside the cavity to ensure that the pressure in the cavity is accurate and effective.
Ethylene oxide sterilization concentration 1g/L Adjustable
Leakage rate of sterilization chamber The leakage rate is measured under the conditions of no-load and constant temperature in the sterilization chamber, the test pressure is -50kPa, and the measurement time is 1h. The average leakage rate within the measurement time is ≤0.16kPa / min.
Sterilization time 0-99 hours Adjustable
Vacuum speed 15-25 minutes to -60kpa
Air replacement Automatic ventilation, ventilation times and interval time can be set freely
Automatic control system One-key start to end, the whole process of automatic completion with printing records
Display status Display temperature, humidity, pressure, sterilization time, residual gas treatment time, frequency

Printer
Record and print the sterilization information of the whole process for verification.
Humidity sensor The built-in humidity sensor automatically detects the humidity in the cavity to ensure that the humidity in the cavity is not less than 45% RH.
Residual gas treatment device The removal rate of the filter with a particle diameter ≥ 0.3 μm is not less than 99.5%.
Temperature sensor The built-in temperature sensor automatically detects the temperature in the cavity to ensure that the temperature in the cavity is maintained within an accurate range of 50 ° C ± 3 ° C.
Humidification system Pulse humidification under vacuum to ensure that the humidity in the cavity is uniform and controllable; the humidity in the sterilization chamber should be controlled within the range of relative humidity 45% -80%;
alarm system High temperature alarm system, ultra-low pressure alarm system; When the sterilization temperature of sterilization chamber exceeds 59℃, the alarm shall be audible.
Vacuum rate Under no-load condition, the time for the sterilization cabinet to vacuum from atmospheric pressure to -60kpa should be ≤30min.
Vacuum system The use of oil-free vacuum pump, simple and convenient, fast vacuum rate, long service life.
Multiple protection functions With over - pressure and over - temperature protection function, more safe and reliable.
Heating system Adopt explosion-proof electric heating device, more convenient and fast



HTAJ-3cube series Ethylene oxide sterilizer

HTAJ-3cube series Ethylene oxide sterilizer

HTAJ-3cube series Ethylene oxide sterilizer

HTAJ-3cube series Ethylene oxide sterilizer

HTAJ-3cube series Ethylene oxide sterilizer

 


Inquiry

Message box

  • Your Name:

  • Message:

  • Contact info:

  • Country:

Recommended Products

If you have any questions, please contact us!

CONTACT US

Copyright © 2002-2020 Henan Angel Medical Instruments Co., Ltd.

Address:Xiangjiang Road,Industry Zone,Hua County Henan Province ,China

Telephone: +86 18317721166 +86-372-8192266 +86 18837238975 Email: support@cnhuataigroup.com

Phone Mobile

Phone

+86 18317721166

Mobile